THE TOLERANCES LIMIT FOR KNITTED FABRIC
YARN DYED CHECK OR STRIPE PATTERN:- 1.5”/3.8 cm at 60”/152 cm width fabric or customers tolerance.
PRINTED CHECK OR STRIPE : - 1.2”/3 cm at 60”/152 cm width fabric or customers tolerance.
SOLID COLOUR JERSAY BOWING OR SKEW : - 5% or customers tolerance.
FABRIC WIDTH ROLL TO ROLL UPDOWN : - 1”-2” plus minus acceptable.
RUNNING AND REPEATED DEFECT THROUGH MORE THAN 3 CONTINUOUS YARDS ;- REJECT.
DUE TO LOOSENESS OR TIGHTNESS SELVAGES RIPPLE OR PUCKERS :- REJECT.
WIDTH MEASUREMENT POINT WILL BE CONSIDER FROM PIN TO PIN.
STRIPE WIDTH 1MM PLUS/MINUS – OK.
BETWEEN SIDE TO SIDE, BOTHSIDE TO CENTER OR METER TO METER SHADE VARIATION- REJECT.
ONE MORE DEFECTS WITHIN ONE SQUARE METER/SQUARE YARDS PENALTY POINTS WILL NOT MORE THAN 4 POINTS.
কোন মন্তব্য নেই:
একটি মন্তব্য পোস্ট করুন