ON STENTER MACHINE 100% CHECK.
১. One Q.C Machine in a Shift Headed by Shift In charge.
২. Check the batch card process information follow properly. Ensure dry/heat set properly done.
3. Check Output Dia , GSM Check.
4. Shrinkage fabric Cut 1 or 2pcs / 1000 kg.
5. 100% on line Check Defects evaluated as 4 point system and make report.
6. Ensure fabric has No sinker, needle, DIA, crease, any line marks.
7. Ensure fabric No mark from machine, If found any fault about that machine Inform to the Respective production operator, Management to Rectify and take sign.
On line Quality Test Compecting Machine
1. Two QC / Machine in a Shift Headed by a Shift In charge
2. 100% Goods Check and Reported 4 point system.
3. Shrinkage fabric cut when Dia as per Requirement Machine speed should not be 20 more.
4. GSM Continuity fabric ( 8”x8” )Try to cut Beside the Defect area or end of the roll.
4. GSM Continuity fabric ( 8”x8” )Try to cut Beside the Defect area or end of the roll.
5. Ensure on uneven/ M2M Shade.
6. No line Mark allowed if found any mark stop machine inform The respective Operator/ Management and take action.
7. Record the Defect QTY with evaluated as 4 point system and grade.
8. Store the ok Goods in the ok area.
9. Store the N/C goods in the N/C table.
10. Store the Reject goods at the reject area.
11. Before delivery the N/C goods must be confirmed by QAD.
12. Follow up and take action.
কোন মন্তব্য নেই:
একটি মন্তব্য পোস্ট করুন